Login    Forum    Search    FAQ     Radio

Board index » Computer Discussions » Hardware Talk




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post Posted: Fri Aug 27, 2010 11:33 am 
Offline
SUPER USER
User avatar

Joined: Thu Apr 15, 2010 6:36 pm
Posts: 664
Apple files chip block stack patent

Apple has filed a patent application that supports the stacked-component design of its A4 chip used in the iPad and iPhone 4, and points to further future integration of multiple system components on the same die.

The filing, "Systems and methods for providing a system-on-a-substrate," describes methods for reducing the size of a device by combining — in the words of the application — "all of the components of the system on the same microchip."

And by "all," the application is rather inclusive: "The components of a system can include one or more of a processor, memory (e.g., RAM, SDRAM, DDR RAM, or ROM), CODEC circuitry, Input/Output ("I/O") circuitry, communication circuitry, accelerometers, capacitors, inductors, or any other suitable components."

Apple's A4 chip isn't quite as all-embracing. As the teardown junkies and part-suppliers at iFixIt showed when they partnered with Chipworks to deconstruct Apple's ARM-based part, the A4 stacks two layers of RAM above the processor die in the A4's package.

Apple's patent filing goes further, though. It foresees a time when far more components can be placed on the same die: hence the term "system-on-a-substrate."

In one "embodiment" — patentese for "example" — a substrate can combine multiple components such as any or all from those listed above. That substrate, packaged up as a single chip, can then sit on a flexible printed circuit board ("flex"), which can extend beyond the package to support other components.

The filing also envisions embodiments in which the substrate can support both a flex layer upon which, say, memory is installed, along with a series of other components combined into their own package.

The goal off all this mixing and matching and cramming and combining is component shrinkage. According to the filing, a printed circuit board may require traces that are 60 micrometers in width and spaced 60 micrometers apart, while a substrate can get away with 15/15 — that would allow, according to the filing, a four-layer, 0.2 millimeter–thick substrate to replace a six-layer, 0.5 millimeter–thick PCB.

In addition to a substrate's straightforward size advantages, the ability to stack components on top of one another — as is done in the A4 — provides another opportunity to shrink a part's footprint.

In handheld, pocketable devices, size does matter — and this patent filing describes a series of ways that Apple could pack more functions into smaller spaces. Whether such a straightforward idea as component-stacking and substrate-packing is patentable, however, remains to be seen.


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 1 post ] 

Board index » Computer Discussions » Hardware Talk


Who is online

Users browsing this forum: No registered users and 1 guest

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron